Jim Wendler's 5/3/1 has been around since 2009, and it's still one of the most popular strength programs in the world. Its popularity doesn't come from cleverness. It works for years at a time without burning you out, because the main lifts start light, progress slowly, and leave room for a life outside the gym.
This guide covers how 5/3/1 works: the training max, the four-week cycle, the AMRAP sets, the most common supplemental templates, and the mistakes that cause lifters to stall. Every percentage is worked out with real numbers so you can run the program tomorrow.
How 5/3/1 Works
5/3/1 is built around four main lifts: the squat, bench press, deadlift and overhead press. In the standard setup you train four days a week, with one main lift per day:
- Day 1: Overhead press
- Day 2: Deadlift
- Day 3: Bench press
- Day 4: Squat
Each cycle lasts four weeks. The program is named after the rep targets for the top set in the first three weeks: 5 reps in week one, 3 in week two, and 5/3/1 across the three working sets in week three. Week four is a deload.
The core principles are short: start too light, progress slowly, beat your rep records, and don't skip the deload.
The Training Max: The Part Most People Get Wrong
In 5/3/1, every percentage is calculated from your training max (TM), not your true one-rep max. Your training max is 90% of your 1RM.
So if you can squat 400 lb for a single, your training max is 360 lb. When the program calls for 85%, that's 85% of 360 (about 305 lb), not 85% of 400.
The lower TM is the most important part of the program. It means your "heavy" week-three top set at 95% is actually only about 85–86% of your real max. That buffer lets you hit quality reps, push the last set hard, and keep progressing cycle after cycle without grinding.
Don't know your 1RM? Use a recent rep max. Take a weight you lifted for 3–5 good reps, estimate your 1RM with a calculator (Epley: weight × (1 + reps ÷ 30)), then take 90% of that. If you're unsure, round down. Starting light costs you nothing. Starting heavy costs you the whole cycle.
The 5/3/1 Percentages, Week by Week
Each training day has three main working sets. The last set of weeks one to three is marked "+", which means it's an AMRAP: as many good reps as possible.
| Week | Set 1 | Set 2 | Set 3 |
|---|---|---|---|
| Week 1 (5s) | 65% × 5 | 75% × 5 | 85% × 5+ |
| Week 2 (3s) | 70% × 3 | 80% × 3 | 90% × 3+ |
| Week 3 (5/3/1) | 75% × 5 | 85% × 3 | 95% × 1+ |
| Week 4 (deload) | 40% × 5 | 50% × 5 | 60% × 5 |
All percentages are of your training max. Warm up before the first working set as normal.
Worked example: 400 lb squat
With a 400 lb 1RM your training max is 360 lb. Rounded to the nearest 5 lb, a full cycle looks like this:
| Week | Set 1 | Set 2 | Set 3 |
|---|---|---|---|
| Week 1 | 235 × 5 | 270 × 5 | 305 × 5+ |
| Week 2 | 250 × 3 | 290 × 3 | 325 × 3+ |
| Week 3 | 270 × 5 | 305 × 3 | 340 × 1+ |
| Week 4 | 145 × 5 | 180 × 5 | 215 × 5 |
Notice that the heaviest set in the whole cycle, 340 lb, is 85% of the lifter's true max. A lifter who can squat 400 should get several reps there, and that's the point.
AMRAP Sets: Where the Progress Comes From
The "+" set is the engine of 5/3/1. The minimum is the prescribed reps (5, 3 or 1), but you keep going for as many clean reps as you can. Stop when bar speed slows sharply or your form starts to break down. That usually lands around RPE 9, with one rep left in the tank. It isn't a set to true failure.
Your AMRAP sets serve two purposes:
- They drive strength gains. The extra reps add meaningful high-effort volume at a heavy load.
- They're your progress check. Hitting 9 reps at 305 when you hit 6 last cycle is a rep PR, which means you're stronger even though your TM only went up 10 lb.
Log every AMRAP. Comparing estimated 1RMs from these sets across cycles is the clearest way to see whether the program is working. If you want to understand how proximity to failure works in more detail, our complete guide to RPE training covers the scale.
How to Progress Your Training Max
After each four-week cycle, add to your training max:
- Upper body (bench, overhead press): +5 lb (about 2.5 kg)
- Lower body (squat, deadlift): +10 lb (about 5 kg)
That doesn't sound like much. Over a year, though, it adds up to roughly 65 lb on your upper-body TMs and 130 lb on your lower-body TMs, on paper. Nobody progresses that cleanly forever, but the slow pace keeps you from outrunning your recovery.
What to do when you stall
You've stalled when you can't hit the minimum reps on an AMRAP set, for example only 2 reps when the target is 3+. When that happens, reduce that lift's training max by about 10% and work back up. It feels like going backwards. In practice, the lighter weights let you string together several more cycles of rep PRs, and you usually pass your old numbers within a couple of months.
Only reset the lift that stalled. If your bench is stuck but your squat is still moving, keep the squat TM where it is.
Supplemental Templates: BBB, FSL and More
The three main sets alone are a light workload. 5/3/1 relies on supplemental work after the main lift to build muscle and work capacity. The two most popular options:
Boring But Big (BBB)
After your main sets, do 5 sets of 10 reps at 50–60% of your training max, usually on the same lift. For our 400 lb squatter that's 5×10 at 180 lb (50%) or 215 lb (60%).
BBB is famous for adding size, and it's hard. Fifty reps of squats or deadlifts after your top sets is a lot of volume. Start at 50%, keep rest periods around 90 seconds, and only move to 60% once 50% feels routine.
First Set Last (FSL)
After the main sets, go back to your first working set's weight (65%, 70% or 75% depending on the week) and do several sets of 5–8 reps. FSL is less brutal than BBB and works well for lifters who want more strength-focused volume or train with less recovery headroom.
Assistance work
On top of the supplemental sets, Wendler recommends some push, pull and single-leg or core work each session. Rows, chin-ups, dips, lunges and ab work all fit. Keep it simple: pick two or three movements and get 25–100 total reps of each per session.
Who Should Run 5/3/1?
5/3/1 is a great fit if you:
- Have finished a beginner linear progression and can no longer add weight every session
- Want a program you can run for months or years with minimal planning
- Train three or four days a week and have a busy life outside the gym
- Care about getting stronger on the big four lifts
It's a weaker fit if you:
- Are a true beginner. You can progress faster with session-to-session progression first.
- Are peaking for a powerlifting meet. Standard 5/3/1 doesn't practice heavy singles near your true max or build toward a competition day. A block-periodized plan with a dedicated peaking phase is better for the last 8–12 weeks before a meet.
- Want maximum muscle growth. 5/3/1 can build plenty of muscle with BBB, but a hypertrophy program with more exercise variety and volume tracking will do better for physique goals.
Common 5/3/1 Mistakes
1. Using your true max instead of a training max
This is the most common way people break the program. Without the 10% buffer, week-three sets become grinders, AMRAPs shrink, and you stall within two or three cycles.
2. Grinding AMRAP sets to failure
An ugly extra rep doesn't make you stronger. It just makes the next session worse. Stop when form or bar speed breaks down.
3. Skipping the deload
Week four feels too easy, so people skip it. The deload is what lets the program run for years without accumulating fatigue. If you want more on why, read our deload week guide.
4. Increasing the TM too fast
Hitting 12 reps on a 5+ set is tempting evidence that you should add 30 lb. Don't. Keep the standard increments. Big AMRAP numbers are a sign the program is working, not that it needs changing.
5. Turning assistance into a second workout
Ten accessory exercises won't help your main lifts. They'll make them worse. Pick a few movements, do them consistently, and go home.
Running 5/3/1 in MyLiftingCoach
MyLiftingCoach includes a full 5/3/1 template that handles the math for you. It sets your training max at 90% of your current maxes, calculates every set to your plate increments, marks AMRAP sets, and schedules the deload week. Choose standard 5/3/1 or Boring But Big (5×10 at 50% or 60% of TM), then add your own accessories.
Because the app tracks every AMRAP, you can see your estimated 1RM trend across cycles in analytics instead of guessing whether you're still progressing.
Let the App Do the 5/3/1 Math
MyLiftingCoach sets your training max, calculates every set to your plates, tracks your AMRAP rep PRs and schedules the deload, so you just show up and lift.
Start 5/3/1 in MyLiftingCoachFrequently Asked Questions
What is a training max in 5/3/1?
Your training max is 90% of your true one-rep max. Every 5/3/1 percentage is calculated from it, which keeps the heaviest sets around 85% of your real max and leaves room to progress.
What are the 5/3/1 percentages?
Week 1: 65%x5, 75%x5, 85%x5+. Week 2: 70%x3, 80%x3, 90%x3+. Week 3: 75%x5, 85%x3, 95%x1+. Week 4 (deload): 40%x5, 50%x5, 60%x5. All percentages are of your training max.
How much weight do you add each 5/3/1 cycle?
Add 5 lb (about 2.5 kg) to your bench and overhead press training maxes and 10 lb (about 5 kg) to your squat and deadlift training maxes after every four-week cycle.
What is Boring But Big?
Boring But Big (BBB) is a 5/3/1 supplemental template: after your main sets, do 5 sets of 10 reps at 50-60% of your training max, usually on the same lift.
Is 5/3/1 good for beginners?
5/3/1 works best once you've finished a beginner linear progression. True beginners can usually add weight every session, which is faster than 5/3/1's monthly increases.